改善E1级胶合板用UF胶粘剂预压性能的研究

利用氧化淀粉在树脂合成后期、API在调胶时加入分别对脲醛树脂进行改性，探讨改性UF对胶合板预压强度的影响。采用正交实验法对比改性后胶合板的预压性能和改性后胶合板的甲醛释放量的变化。结果表明：随着API量的加大，胶合板的预压性能得以提高；而氧化淀粉改性后则随着量的加大，一定范围内胶合板的预压性能得以提高，加入量继续加大后反而下降。     

Influence of death struggle on the structural changes in chub mackerel muscle during chilled storage

ABSTRACT: Chub mackerel (34–35 cm, approximately 500 g), which were caught by fishing with a rod and line at the Bungo Channel, Oita prefecture, were rested overnight in a fish preserve and either killed by decapitation (control group) or allowed to struggle in air for 30 min (struggled group). Muscle samples were excised every 4 h, and measurements on breaking strength and histological observations were done for both groups. The breaking strength of muscle in the control group was significantly higher than that in the struggled group, whereby a decrease in breaking strength was delayed for 12 h compared to the struggled group. Light microscopy showed space extension among muscle cells in association with a decrease in breaking strength. Especially in the struggled group, the extended area was larger and the difference in area was significant at the time when breaking strength showed a significant difference. Using electron microscopy, the extended area showed cut and/or disappeared collagen fibrils. From these results, it was demonstrated that struggling to death promoted the degradation of collagen fibrils and the weakening of connective tissue and, resultantly, led to the faster softening of muscle of chub mackerel.     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

室内型胶合板天然耐久性的初步研究

作为一项反映材料优劣的重要的评价指标,天然耐久性直接决定了材料的使用寿命.笔者通过对胶合板胶合强度性能连续14年的跟踪测定,讨论和分析了胶合板的天然耐久性.最后总结出了胶合板在使用过程中随时间迁移其胶合强度性能随外界变化的规律,以期为胶合板的生产制备、生产工艺的改进及其应用领域的拓宽等方面起到一定的指导作用.     

漆酶处理对未漂硫酸盐浆抗张强度和纤维表面的影响

探讨了漆酶处理对未漂硫酸盐浆抗张强度的影响,研究了漆酶处理的主要工艺参数对纸页湿抗张强度的影响;并采用扫描电镜(SEM)对漆酶处理前后纤维表面微细结构的变化进行了研究。结果表明,漆酶可以改善纸浆的湿抗张强度,但对于抗张强度不起作用;提高纸浆湿强度的最佳酶促反应条件为:酶用量16U(以每克绝干浆计),温度45℃,pH值4.5,处理时间2h。扫描电镜分析表明,漆酶处理使得纤维表面变得粗糙,纤维之间产生了黏结性,湿强度得以提高。     

川西粉质黏土-衬砌接触面冻结强度规律研究

为揭示川西灌渠粉质黏土-衬砌接触面间冻结强度规律,针对川西地区灌渠渠基土开展了冻结作用下冻结温度、冻结时间、初始含水率、法向荷载4种影响因素在不同条件下的剪切试验.结果 表明:接触面间峰值抗剪强度与冻结温度、初始含水率变化呈负相关,与冻结时间、法向荷载变化呈正相关.此外,利用正交分析,揭示了4种因素对峰值抗剪强度影响的...     

双质量飞轮内部传动结构强度及疲劳寿命分析

随着初级飞轮与次级飞轮相对转角的变化,分段变刚度双质量飞轮具有不同的刚度特性和非线性变化转矩,双质量飞轮内部传动结构作为传递动力和运动部分,结构可靠性和使用寿命必须保证.将建立的三维CAD模型导入HyperMesh软件中进行有限元分析前处理,建立了有限元分析模型,经过仿真求解计算,分析了结构变形、应力分布特点,对比分析...     

紫花苜蓿和马唐根的生物力学性能及相关因素的试验研究

选择固土护坡植物时,植物根的抗拉强度是一项重要的力学指标。对豆科的紫花苜蓿和禾本科的马唐根的抗拉力和纤维素含量的研究表明,根的抗拉强度和纤维素含量均与直径呈显著的负相关关系,根的抗拉强度与纤维素含量呈正相关关系,表明“木本植物根的抗拉强度、直径和纤维素含量关系”的研究结论在这两种草本植物上也同样适用。对紫花苜蓿和马唐根的抗拉强度与其“木质素/纤维素”之间关系的研究表明,两者呈负相关关系,证实纤维素含量对于维持根抗拉强度的作用大于木质素含量。研究发现,豆科紫花苜蓿根的应力-应变为对数函数关系,不符合胡克定律,马唐根的应力-应变关系的本构方程基本遵从胡克定律。直径愈小,紫花苜蓿和马唐根的应力—应变关系对应变率敏感程度愈高,根的极限延伸率愈大。另外,根的抗拉力和直径测试设备的改进,实验结果更准确可靠。这方面研究对揭示植物根系提高土壤抗冲击性和抗剪强度机理,更好地进行水土保持植物的选择和优化组合具有重要意义。     

基于声学技术的红沿河核电站附近海域夏季水母通量测量

大量水母涌入核电站取水口会对核电冷源取水安全造成严重威胁,为把握夏季红沿河核电站附近海域水母的密度和基本运动规律,分别于2017年7、8、9月在红沿河核电站附近海域使用同时搭载科学探鱼仪(120、200 kHz)和多普勒流速剖面仪(ADCP)的调查船,沿垂直等深线方向进行25 h、10 n mile长垂直断面往复走航水...